Heavy-Duty Entry
Custom OEM Aluminium Double Glazed Windows Factory & Suppliers for Tabuk
Precision Architectural Fenestration Engineered for Extreme Thermal Fluctuations, Sandstorms, and Vision 2030 Mega-Developments in the Tabuk Province.
Direct OEM Manufacturing Portfolio
High-Performance Systems for Tabuk Projects
Manufactured under ISO 9001 certified conditions to satisfy Saudi Building Code (SBC 601/602) energy and load standards.
Smart Access
Thermal Break
Certified AS2047
Courtyard System
Tempered Double Glazed
Double Glazed Sliding
Acoustic Louvre
Regional Localization Engineering
Overcoming Tabuk's Severe Microclimate Demands
Tabuk presents unique geographic and environmental challenges: scorching desert summers reaching 48°C, freezing winter nights below 0°C on elevated plateaus, and aggressive sandstorms. Standard aluminium fenestration fails within months.
Diurnal Thermal Shock Deflection
The northwestern desert terrain experiences dramatic swings of up to 25°C within a single 12-hour cycle. Our custom OEM profiles feature PA66 GF25 reinforced polyamide thermal breaks that decouple interior and exterior aluminium chambers, preventing frame warping, thermal expansion stress, and interior condensation during chilly Tabuk winters.
Zero-Infiltration Dust & Sand Sealing
Seasonal Shamal and desert dust storms propel microscopic silica particles at high velocities. DERCHI systems utilize vulcanized continuous EPDM compression gaskets paired with stepped labyrinth drainage channels. This stops sand penetration into roller bearings, eliminating operational jamming and draughts.
Patented Anti-Intrusion Security
For modern private villas in Tabuk and sprawling residential estates, privacy and protection are paramount. Our factory integrates the Four-Side Six-Point Perimeter Hardware, an invention patent providing steel deadbolt latching points that counter pry attacks while pulling the sash uniformly against weatherseals.
| Performance Characteristic | Saudi SBC 601/602 Benchmark | DERCHI Tabuk Custom OEM Specification | Architectural Benefit |
|---|---|---|---|
| U-Factor (Thermal Transmittance) | ≤ 2.6 W/(m²·K) | 1.30 – 1.65 W/(m²·K) (Triple/Double Low-E) | Drastic reduction in HVAC tonnage; achieves Estidama / Mostadam certification points. |
| Solar Heat Gain Coefficient (SHGC) | ≤ 0.25 | 0.18 – 0.22 (Magnetron Sputtered Low-E) | Blocks 82%+ of infrared heat energy while preserving daylight illumination. |
| Air Permeability (Airtightness) | Class 3 (EN 12207) | Class 4 (≤ 0.05 m³/(h·m²)) | Guarantees complete exclusion of particulate matter during harsh sandstorms. |
| Wind Load Resistance | Zone 2 Tabuk (1.8 kPa) | Class C5 / ≥ 3.0 kPa (Hurricane Impact Tested) | Withstands vortex buffeting on coastal installations near the Red Sea and valley cliffs. |
| Acoustic Attenuation (STC) | Rw ≥ 30 dB | Rw 38 – 44 dB (Asymmetric Acoustic Interlayer) | Creates silent interior sanctuaries for villas, executive majlis, and hotel environments. |
Tabuk Architectural Transformation
Driving Next-Generation Fenestration in Northwest KSA
With massive infrastructure investments transforming Tabuk Province into an international hub for sustainable tourism, green living, and futuristic design, building envelope criteria have fundamentally evolved.
Ultra-Minimalist Slim Sightlines
Luxury residential and hospitality concepts across Duba, Al Wajh, and modern Tabuk demand panoramic views of mountain ridges and desert horizons. Our slim-profile double-glazed sliding systems feature interlocking mullions as narrow as 26mm, capable of supporting structural sashes exceeding 3.5 meters in height.
Net-Zero Energy Alignment
Developers are prioritizing carbon neutrality. By adopting multi-chambered thermally broken aluminium extrusion with double-tempered argon-filled insulated glass units (IGUs), our windows deliver the energy performance needed to meet aggressive decarbonization standards across Saudi Arabia.
Seaside & Saline Resistance
Coastal developments along Tabuk’s Red Sea shore face heavy airborne salt deposits. DERCHI provides high-durability fluorocarbon (PVDF) spray and Qualicoat Class 2 certified architectural powder coatings, tested for over 3,000 hours of salt spray exposure to resist blistering, chalking, and UV fade.
Prefabricated OEM Modularity
To reduce onsite labor and accelerate contractor handovers, our factory delivers fully pre-glazed, pre-hung window and door modules. Every frame is engineered with slotted thermal expansion joints that accommodate building settlement and micro-movements common in rapid-assembly structures.
Manufacturer Authority & Quality
Why Tier-1 Contractors and Architects Partner with DERCHI
Operating as Guangdong Dejiyoupin Doors and Windows Co., Ltd., we combine 25+ years of specialized fenestration fabrication with an uncompromising zero-defect manufacturing methodology.
180,000 m² Automated Manufacturing Hub
Our intelligent smart facility in Foshan features CNC profile cutting centers, automated 4-corner crimping, and automated insulating glass seal lines. With over 600 skilled technicians and 30+ dedicated R&D structural engineers, we guarantee high dimensional repeatability (±0.5mm) across mass orders.
International Accredited Certification
We build to stringent worldwide standards. DERCHI products are independently verified with CE (EN 14351), NFRC, Australia AS2047, CSA (Canada), Energy Star, and specialized Hurricane Impact resistance, guaranteeing compliance with Saudi civil defense and structural safety codes.
Full-Spectrum Engineering Support
From architectural CAD review and BIM family generation to wind load calculations, thermal simulation reports, and complete shop drawing generation, our bilingual engineering team supports project managers throughout the entire tendering, fabrication, export, and installation cycle.
Procurement Whitepaper FAQ
Frequently Asked Questions from Tabuk Buyers
Detailed technical answers addressing supply logistics, customs clearance, climate resilience, and project customization.
What glass configuration is recommended for Tabuk's intense thermal swings?
For residential villas and commercial spaces in Tabuk, we recommend an insulated glazing unit (IGU) consisting of 6mm Solar-Control Low-E (Double Silver) + 12A/16A Argon Warm-Edge Spacer + 6mm Clear Tempered Glass. For buildings on mountain elevations exposed to freezing winter conditions, a triple-glazed unit with dual Low-E coatings provides enhanced thermal protection, keeping interior U-values below 1.3 W/(m²·K).
How do you protect shipping containers and products from maritime and transit damage to Tabuk?
Export shipments destined for Tabuk are routed via Duba Port or Jeddah Islamic Port. Products undergo a 5-layer protective packing protocol: protective surface film, pearl cotton foam edging, multi-layer bubble wrap, heavy corrugated edge protectors, and fully enclosed, fumigated solid plywood crates reinforced with steel strapping and moisture desiccant bags.
Are DERCHI window systems compliant with the Saudi Building Code (SBC 601/602)?
Yes. Every order destined for the Kingdom is calculated and fabricated to meet SBC 601 (Residential) and SBC 602 (Commercial) thermal transmittance and shading coefficient thresholds. We supply comprehensive laboratory test certificates, glass spec sheets, and thermal simulation reports for direct submission to SASO Saber certification portals and municipal inspection authorities.
Can you supply oversized glazed panels for contemporary majlis and villa openings?
Absolutely. Our heavy-duty architectural sliding and bifold systems utilize reinforced 6063-T6 virgin aluminium profiles with wall thicknesses of 2.0mm to 3.0mm. We manufacture single-leaf sliding sashes weighing up to 450 kg with individual panel dimensions reaching 3.2m wide by 3.8m high, operated by heavy-duty stainless steel bearing tandem rollers.
What hardware configurations prevent track abrasion from desert sand?
For sandy climates like Tabuk, we engineer our sliding doors with raised solid stainless steel tracking rails (SUS304) paired with concave sealed-bearing tandem wheels. We integrate brush pile seals lined with siliconized plastic fins that continuously sweep the track ahead of roller movement, preventing sand grains from getting crushed into the track surface.
What is the standard production and shipping lead time to Tabuk Province?
Standard OEM production requires 25 to 35 business days following final approval of shop drawings and finish samples. Maritime freight from our Foshan facility port to Saudi Red Sea ports typically requires 18 to 24 days. Our dedicated logistics desk coordinates with your local freight forwarder for direct delivery to your construction site in Tabuk.